Rent ARRI Light SkyPanel S60-C LED Softlight

By ARRI

ARRI SkyPanel Package Includes:
ARRI SkyPanel S60-C LED Softlight
ARRI AC Power Supply Unit
Hard Case

This item is available in Los Angeles and beyond.
Rent now by calling (818) 557-8403 or selecting the cart above.

Replacement Value: $6000

Frequently Rented With

Details and Specs

ARRI LIGHT SKYPANEL S60 PRODUCT HIGHLIGHTS

  • Manual Yoke
  • Panel Surface Area: 25.4 x 11.8″
  • 115° Beam Spread, Rail Mount Adapter
  • Color Temperature from 2,800-10,000K
  • Full Gamut Color Mixing
  • Hue and Saturation Control
  • Full Minus to Full Plusgreen
  • 0-100% Dimming, DMX Control
  • CRI: 95, TLCI: 90
  • Multi-Voltage AC, Optional Battery Power

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8″ and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C is fully color “tuneable” allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you’re lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel’s onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.

The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8″) pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.

Specs:
Light Fixture
Optical System Soft LED diffusion panel, 50,000 hr lamp life
Beam Angle 115°
Color Adjustment White light: 2,800 – 10,000K continuously variable Correlated Color Temperature
Colored light: Full RBG+W Color Gamut with hue and saturation control
Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Estimated color shift over time: < 200 hr
Dimming 0-100% Continuous
Control On-Board Controller, 5-Pin DMX In and Through
EtherCon LAN Network connectivity, USB-A for firmware updates
RDM (Remote Management Device): DMX setup, hour counter and standard RDM commands
Mount Steel yoke, Junior pin 1-1/8″ (28 mm)
Certification CE, FCC; GS, cNRTL, CB (pending)
IP 20
Operating Temperature -4 to +113ºF (-20 to +45º)C
Dimensions Illuminated front face only: 25.4 x 11.8″ (64.5 x 30 cm)
Outside dim. excluding Junior pin: 27 x 17 x 5.23 (688 x 433 x 133 mm)
Weight 26.5 lb (12 kg)
Power Supply
Voltage Range Input: 90-250 VAC, 50/60 Hz
Output: 48 VDC
Connections Input: powerCON TRUE1 to Edison
Output: 3-Pin XLR, 10 A (pin 1: negative / pin 2: positive)
powerCON TRUE1 (mains power through)
Mounting Super clamp attachment or SkyPanel PSU rail mount
Control Onboard On/Off switch
Weight 11 lb (5.0 kg)

 

Rent the Arri Light SkyPanel S60-C LED Softlight from Deck Hand Camera Rentals Today!